Pyramid Abrasives™ are extremely resistant to wear, build-up, and gouging. They work on almost all surfaces, including aluminum, wood, mild steel, composites and fiberglass. They can be used to remove material or finish the surface.

The resulting unique product characteristics and advantages are:

  • Revolutionary abrasive made from 100% stainless steel
  • Exceptional long life performance
  • Consistent finish
  • Does not load up and is easily cleaned
  • Recyclable
  • Medium to Fine grades
  • Thin and flexible like other abrasive products
  • Long life reduces down time and increases production
  • Last 50 plus times longer than traditional sandpaper in most applications
  • Patent pending

THESE PRODUCTS ARE NOW AVAILABLE

Available Accessories
These accessories are available for purchase seperatly

Geometries for Pensander


Click for Larger View
(Click image for larger view)
Ideal for soft woods, hard woods, Arts and Crafts.
Set of geometries attachments is available seperately in the following two grades:

Set of 4 geometries for straight shanks and 3 geometries for angled shanks    (Fine) (part# 99-011)
  • Takes an unfinished surface to a fine finish.


  • Set of 4 geometries for straight shanks and 3 geometries for angled shanks   (Medium) (part# 99-012)
  • Takes a rough surface to a fine finish.

  • Transformer


    Click for Larger View
    (Click image for larger view)
    12v Volt Transformer for Sharxtooth Pensander (part# 99-013)


    Very compact design. NORYL casing (heat resistant - a necessity for transformer enclosures). Capacity 2.0A at 16 Volt open circuit - and 12 Volt under load = 24VA (DC). Primary supply 110-120V. Polarized socket for MICROMOT plug. Red LED indicates readiness for use. PTC (Positive temperature coefficient) element prevents overload, the plugged in tool will not automatically restart. After cooling down, the AC wall plug should be disconnected briefly to reset the adapter. Modern design with holes for storing bits. Foldable tool rest provides a secure place for keeping the MICROMOT tool ready for use.

    2 1/2" Triangle
    for Delta Sander


    Click for Larger View
    (Click image for larger view)

    2 1/2" Triangle for Sharxtooth Delta Sander is available in these three grades:

    2 1/2" Fine Triangle (part# 97-020)
  • Takes an unfinished surface to a fine finish.


  • 2 1/2" Medium-to-Fine Triangle (part# 97-021)
  • Takes a rough surface to a fine finish.


  • 2 1/2" Coatings-Removal Triangle (part# 97-022)
  • Removes paint, coatings and stains-leaving a fine finish.


  • 3" Sanding Disc with Teeth
    for Delta Sander


    Click for Larger View
    (Click image for larger view)

    3" Medium-to-Fine Sanding Disc with Teeth for Cutting (part# 03-010)
  • Cuts wood, plastics and soft metals. Takes a rough surface to a fine finish.




  • 2" Sanding Disc
    for Longneck Angle Grinder


    Click for Larger View
    (Click image for larger view)

    2" Sanding Disc for Sharxtooth Longneck Angle Grinder is available in four grades:

    2" Medium-to-Fine Sanding Disc (part# 02-008)
  • Carves and sands. Takes a rough surface to a fine finish.


  • 2" Medium-to-Fine Sanding Disc with Teeth (part# 02-016)
  • Carves, sands and cuts. Takes a rough surface to a fine finish.


  • 2" Fine Sanding Disc (part# 02-007)
  • Carves and sands. Takes an unfinished surface to a fine finish.


  • 2" Fine Sanding Disc with Teeth(part# 02-015)
  • Carves, sands and cuts. Takes an unfinished surface to a fine finish.

  • 10" Sanding Disc
    for Disc Sander


    Click for Larger View
    (Click image for larger view)

    10" Sanding Disc for Sharxtooth Disc Sander is available in two grades:

    10" Fine Sanding Disc (part# 10-001)
  • Takes an unfinished surface to a fine finish.


  • 10" Medium-to-Fine Sanding Disc (part# 10-002)
  • Takes a rough surface to a fine finish.


  • 2" Sharxtooth Oval


    Click for Larger View
    (Click image for larger view)

    2" Oval Disc (part# 99-020)
  • Hand tool for soft woods and hard woods.

  • Home      |      Applications      |       Products       |       Order       |       Contact

    Pyramid Abrasives™   |    32 Woodlake Dr. S.E.    |    Rochester, Minnesota 55904   |   507-282-8214   |   Fax: 507-282-8215
    Questions? Email us info@PyramidAbrasives.com